|
These fittings are suitable for gravity or low pressure and are available from SpeedShopUK through special order. Please
call or send us an email with your requirements.
For a professional assembly we recommend using
Soft Jaws in the vice to protect the hose ends and AN/JIC Sized -
Spanners which give an ideal aluminium-on-aluminium fit helping to preserve the anodising and life of the fittings.
SpeedShopUK has created this guide by reworking images and text that were originally downloaded from
Earls Performance Products
 |
 |
| Cut the hose square with a sharp knife. |
Slip the aluminum collar over the hose. |
 |
 |
| Mark the hose at the back of the collar. |
Lubricate the inside of the hose and the outside of the nipple. Use assembly lube or engine oil. Do not use a silicon-based lube. |
 |
 |
| Push the hose end into the hose until it bottoms. |
Check the mark made on the hose in Step 3 to ensure that the hose end has indeed bottomed against the end of the hose. Blow the assembly clean and pressure test before running the car. |
|
