|
This Earls Performace Product is available through SpeedShopUK through special order only. Please call or send us an email with your requirements.
For a professional assembly we recommend using
Soft Jaws in the vice to protect the hose ends and AN/JIC Sized -
Spanners which give an ideal aluminium-on-aluminium fit helping to preserve the anodising and life of the fittings.
SpeedShopUK has created this guide by reworking images and text that were originally downloaded from
Earls Performance Products
 |
 |
| Assemble the tube-mate end onto the hose onto the hose per Auto-Fit hose and instructions. |
Cut and de-burr the tubing. The cut must be square. |
 |
 |
| Using the TUBE-MATE grooving tool, groove the tubing. The tubing may also be beaded (or barbed). See Earl’s new tube beading tool. |
Push the tubing into the correct size Tube-Mate until it bottoms. |
 |
 |
| Tighten the TUBE-MATE nut. |
Blow the assembly clean and pressure test before running the car.
CTUBE-MATE hose ends are designed to be used only with beaded, barbed or grooved rigid tubing at no more than 25 psi working pressure. |
|
