We can supply Push-on Hose Assemblies and all other products in the XRP range, please call or send us an email with your requirements.

SpeedShopUK has created this guide by reworking images and text that were originally downloaded from XRP

Step 1	Step 2
Using a fine tooth hacksaw or XRP Cut-Off Blade, cut the hose at the required length.	Clean away any loose debris from both ends and inside the hose. Secure a fitting in a bench vise and attach hose end to the fitting.
Step 3	Step 4
Lubricate the fitting tail and inside the hose. For easier fitting, you can use a hot air gun to gently warm the hose.	Push the hose over the fitting tail, until it is tight behind the hose finisher.
XRP - Push-on Hose Clamp Installations - Step 1	XRP - Push-on Hose Clamp Installations - Step 2
XRP - Push-on Hose Clamp Installations - Step 3	XRP - Push-on Hose Clamp Installations - Step 4
XRP - Push-on Hose Clamp Removal - Step 1	XRP - Push-on Hose Clamp Removal - Step 2
XRP - Push-on Hose Clamp Removal - Step 3	XRP - Push-on Hose Clamp Removal - Step 4